Estética | JCDR 2022 v19n2 - Clinical Dentistry
Estética | JCDR 2022 v19n2

Vinte lentes de contato de resina bleach, sem preparo

Autores: Ronaldo Hirata,

LEIA MAIS

Entrevista - Alireza Sadr

Autores: Marcelo Giannini, Rubens Nazareno Garcia,

LEIA MAIS

Highligths

RUBBER DAM ISOLATION SURVEY(RDIS) FOR ADHESIVE RESTORATIVETREATMENTS; EFFECTIVE PROTOCOL FOR DAILYHIGH-QUALITY DIRECT POSTERIORCOMPOSITE RESTORATIONS. CAVITYPREPARATION AND DESIGN; RUBBER DAM ISOLATIINFLUENCE OF RUBBER DAM ISOLATIONON HUMAN PULP RESPONSES AFTERCAPPING WITH CALCIUM HYDROXIDEAND AN...

Autores: Rodolfo Bruniera Anchieta, Lucas Silveira Machado,

LEIA MAIS

Planejamento digital do sorriso na correção do plano oclusal anterior usando laminados cerâmicos

Autores: Renata Corrêa Pascotto, Larissa Ishizu, Mariucha Marcon Nemer,

LEIA MAIS

Odontologia Biomimética vs. Odontologia Adesiva: onde vamos parar?

Autores: Victor Pinehrio Feitosa,

LEIA MAIS

Cistos mucosos, pólipos e mucoceles do seio maxilar: diagnóstico e condutas clínicas

Autores: Alberto Consolaro, Stenio Roberto Santos,

LEIA MAIS

Avaliação da rugosidade superficial obtida pela aplicação de ácido fluorídrico a 10% vencido, em cerâmicas reforçadas por dissilicato de lítio

Autores: Diogo De Azevedo Miranda, Rayane da Silva Gripp, Laura Paes Baptista de Oliveira Mendonça, Tayná Ventura de Souza,

LEIA MAIS

Tratamento multidisciplinar da reabsorção cervical externa: relato de caso

Autores: Anderson Seitiro MIYAZATO, Andrey Gonçalves EMIDIO, Vitória Fraga Fogaça MELO E SILVA, Sandrine Bittencourt BERGER,

LEIA MAIS

MATRIZES 3M™ BIOCLEAR™

Autores:

LEIA MAIS

ULTRASSOM PIEZOELÉTRICO U600 LED (PORTÁTIL)

Autores:

LEIA MAIS

Grau de conversão na impressão 3D de modelos: efeito de diferentes parâmetros de impressão

Autores: Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, álvaro Della Bona, Giovan Mateus Balbueno GUERREIRO, Gabriela de Souza BALBINOT,

LEIA MAIS

Versi estetica & Função

Em um universo de ambientes semelhantes e padronização de resultados, a elaboraçãode ideias e projetos exclusivos torna-se um desafio criativo, que demanda esforço intelectual, interpretação de desejos praticamente intangíveis e um desenho conceitual que seduza. Nesse duelo entre o...

Autores: Paula De Carvalho Cardoso, Rafael De Almeida Decurcio,

LEIA MAIS

Por quanto tempo devemos fotoativar os materiais?

Autores: Marcelo Giannini, Carlos Alberto Kenji Shimokawa,

LEIA MAIS

Reabilitação estético-funcional de um paciente com desgastes dentários severos: 18 meses de acompanhamento

Autores: Rafael Boaretto LORENCET, Ricardo PEDRINI, Leonardo Mello DUARTE, Rafael Ratto de MORAES, Paula BENETTI, Gabriela Romanini BASSO,

LEIA MAIS

Editorial Board

Autores:

messages.RevistaAutores: Corpo Editorial,

LEIA MAIS

Twenty bleach resin veneers, without preparation

We come from (when I say “we”, I mean “I”, but we sound more polite…) a city where I believe a big movement started: Curitiba. I’d like to be more precise – and you may correct me – but around the late 1980’s and beginning of the 1990’s, there was an Esthetic Dentistry group...

Autores: Ronaldo Hirata,

messages.RevistaAutores: editorial,

LEIA MAIS

Interview Alireza Sadr

Dr. Sadr is a Clinical Associate Professor at Department of Restorative Dentistry, Director of Operative Dentistry Pre-clinical Training and Associate Director of Biomimetics Biomaterials Biophotonics & Technology (B4T) lab- oratory at University of Washington School of Dentistry.

Autores: Marcelo Giannini, Rubens Nazareno Garcia,

messages.RevistaAutores:

LEIA MAIS

Absolute isolation: essential or dispensable?

In this issue of the highLIGHTS section we will address another topic of interest to dentists, Absolute Isolation. Although it has been a topic discussed for many years and with a lot of evidence available, currently some aspects are worth being approached with greater criteria and assiduously...

Autores: Rodolfo Bruniera Anchieta, Lucas Silveira Machado,

messages.RevistaAutores:

LEIA MAIS

Digital smile design in the correction of anterior occlusal plan using ceramic veneers

Introduction: The use of the Digital Smile Design (DSD), is a growing trend in dentistry. It is an effective tool in communicating with the patient about the esthetic possibilities before starting the treatment, and allows the predictability of results and communication with other members of the...

Autores: Renata Corrêa Pascotto, Larissa Ishizu, Mariucha Marcon Nemer,

messages.RevistaAutores: dental aesthetics, Occlusal plane, Dental Prosthesis Planning,

LEIA MAIS

Biomimetic dentistry vs. Adhesive dentistry: Where is it all going to end?

It is known that dentists in general have never been totally united. There is some competition between areas, departments, universities and professionals who work in the same neighborhood. Nevertheless, the Brazilian Dentistry is experiencing an exponential growth in the number of undergraduate...

Autores: Victor Pinheiro Feitosa,

messages.RevistaAutores:

LEIA MAIS

Mucous cysts, polyps and mucoceles of the maxillary sinus: diagnosis and clinical management

“Mucous cysts of the maxillary sinus” frequently are a clinically important occurrence, as they can induce apprehension in patients and concern in professionals, who are responsible for providing patients with explanations and raising their awareness of the presence of these entities, when...

Autores: Alberto Consolaro, Stenio Roberto Santos, Ingrid Araújo Oliveira Consolaro,

messages.RevistaAutores: Maxillary Sinus Cysts, Mucosal Sinus Retention Cysts, Sinus Polyps, Maxillary Sinus Mucoceles, Post-operative (Surgical) Maxillary Sinus Cysts,

LEIA MAIS

Evaluation of surface roughness obtained by the application of 10% hydrofluoric acid expired in ceramics reinforced by lithium disilicate

Introduction: Dental ceramics are widely used for restorations of anterior and posterior teeth. Restorations longevity is directly related to piece resistance. Hydrofluoric acid (AF) is one of the most used agents in the interaction of cement with the piece. Objective: surface roughness promoted by...

Autores: Diogo De Azevedo Miranda, Rayane da Silva Gripp, Laura Paes Baptista de Oliveira Mendonça, Tayná Ventura de Souza,

messages.RevistaAutores: ceramics, Hydrofluoric acid, date of validity of products,

LEIA MAIS

Multidisciplinary treatment of external cervical resorption: case report

Introduction: External Cervical Resorption (ECR) presents complex and invasive pattern, and its etiology remains little known. Besides, it has aggressive nature, which results in significant dental structure loss. Observations have shown that some predisposing factors trigger the resorption...

Autores: Anderson Seitiro MIYAZATO, Andrey Gonçalves EMIDIO, Vitória Fraga Fogaça MELO E SILVA, Sandrine Bittencourt BERGER,

messages.RevistaAutores: Root resorption, Case reports, Resorption, Multidisciplinary Communication,

LEIA MAIS

Test drive Esthetics

Autores:

messages.RevistaAutores:

LEIA MAIS

Degree of conversion of 3D printed dental casts: effect of different printing parameters

Introduction: This study aimed to evaluate the influence of different layer thicknesses, orientation angles, and post-polymerization on the degree of conversion of a 3D printing resin to dental casts. Methods: 3D printing was performed with a 405 nm digital light processing printer (DLP)...

Autores: Vicente Castelo Branco Leitune, Fabrício Mezzomo Collares, Giovan Mateus Balbueno GUERREIRO, Gabriela de Souza BALBINOT, Alvaro Della Bona,

messages.RevistaAutores: Polymerization, 3D-printing, Dental casts, Raman spectroscopy,

LEIA MAIS

Versi - Aesthetics & Function

In a universe of similar environments and standardization of results, the elaboration of ideas and exclusive projects becomes a creative challenge, which demands intellectual effort, interpretation of practically intangible desires and a conceptual design that seduces. In this duel between the...

Autores: Paula De Carvalho Cardoso, Rafael De Almeida Decurcio, Lúcio Monteiro,

messages.RevistaAutores:

LEIA MAIS

How long should we light-cure materials?

To answer the required photoactivation time for each resin-based material, we must understand the concept of radiant exposure, which is the irradiance applied for a given exposure time. The term irradiance means the flow of energy or radiant power (mW) received per unit of area. In Dentistry, the...

Autores: Marcelo Giannini, Carlos Alberto Kenji Shimokawa,

messages.RevistaAutores:

LEIA MAIS

Aesthetic-functional rehabilitation of a patient with severe tooth wear: 18 months of follow-up

Introduction: Selecting materials and techniques for the esthetic and functional rehabilitation of patients with severe tooth wear caused by parafunctional habits is challenging. Composite resins occlusal increments could rehab the patient’s loss of vertical dimension, providing comfort during...

Autores: Gabriela Romanini Basso, Rafael Boaretto LORENCET, Ricardo PEDRINI, Leonardo Mello DUARTE, Rafael Ratto de MORAES, Paula Benetti,

messages.RevistaAutores: ceramics, Dental veneers, Composite Resins, Cementation, Clinical study,

LEIA MAIS

Copyright © 1998 - 2022 DentalGO | Todos Direitos Reservados. DentalGO é uma marca Dental Press